How To Light A Gas Fireplace Pilot. If you turn the key. If it isn’t lit, turn the knob until.
The pilot light in a gas fireplace is typically found adjacent to the main burner, below the fireplace media such as logs or coals. Holding up the gas regulator dial and then pushing. Insert the key into the gas valve.
This Will Keep The Pilot Light Burning So That The Rest Of The Fire Can Follow Suit.
Make sure the pilot light is on by looking at the control panel on the front of the fireplace. This will start the flow of gas. Press the sparker or use a match to ignite the pilot light.
If You Dont See Any Button, You Must Light The Flame Manually.
Read and follow the instructions that came with you. The gas will be able to flow into the pilot light. Remove the access cover to the controls.
Some Valve Assemblies May Be Inverted In.
The pilot, found as part of the ignition, can often be. You will need to hold your pilot button for the allotted time that your owner’s manual suggests. To ignite the pilot light, press your finger into the center of the control knob and hold it in place.
Turn The Key In The Slot To.
What does a gas fireplace pilot light look like? If the pilot light goes out, you’ll just need to dig deeper. Press the knob down and hold it in place.
It Will Shoot Sideways And Be Directly On Your Thermocouple And Thermopile.
Turn gas control unit the pilot setting aligns with the. Insert key into gas valve. Here’s how to light your gas fireplace with a match:
